1. Home 2. Testimonials 3. Rail Purchase Page and Info
4. Q&A 5. Installation Instructions 6.Purchase Optics 7. Contact Us
Praise for the Pearson's No-Drill Rail Mount
I have a Winchester 94 Classic 30-30 top eject rifle with iron sights I can no longer use at my age. I tried the Pearson No Drill Tac rail system with the optional scout scope and found this system wonderful. I encourage any Winchester 94 owner wishing to scope their rifle to buy the Pearson's Tac rail system. It is the best on the market and allows for extremely fast aim acquisition and shooting. I am proud to recommend this system to all 94 owners.
-Keith Cauley, Monticello, Utah
[My hog hunt] was a success and I'm very pleased with your product. I got a lot of complements on the rail mount.
Ordered the rail and sight on Monday. They showed up today (Saturday). Took about 15 minutes to mount everything. Went out to zero everything. Holy crap! I should have done this 10 years ago. Between this system and Hornady ammo my eyes feel like theyre 20 years old again. Thanks for an awesome sighting system!!!!
From our Facebook page:
Folks, these mounts are rock solid and work like a charm! I installed one a couple years ago on a Model 94 Trapper in 44 Mag that I use as a camp/trailer gun when my wife and I are traveling and fishing here in Alaska.
As my eyes aged I found it progressively more difficult to use the irons. But this mount fixed that. I have two sights zeroed to this weapon, an Ultradot 30MM and a Burris Fastfire III with 8 MOA dot. I can switch back and forth with ease and minimal loss of zero (if any - this rifle has never been a tack driver!). And I have never had any loosening or shifting of the mount despite dozens of range and fishing trips.
Excellent. Product. Period.
I have mounted a quick release on the H1 Aimpoint so I can snap it of and use the iron sights too.
I am so glad I found your website while searching the internet for 'mounting options for top eject rifles'. I could not be more pleased with the rail I purchased for my Winchester 30-30 model 100! Great quality, and what an absolute breeze to install.
I previously have side-mounted my optics due to the top eject on the 30-30, but always found that to be quite a pain due to several reasons. It took 10 minutes to install, and now this gun is set to take on any kind of optic I can imagine in the traditional top mount placement.
Thank you again, Basil.
Here's a pic from my hunt last week in the Black Hills. Your scope mounting system worked just fine. I really like your design because I didn't need to drill any holes in my rifle. My grandpa bought the model 94 new in 1946 and its still in excellent condition. I had trouble with the original iron sights because of my bifocals but mounting the scope cleared up those problems. I chose a weaver 4X scout scope and it fits perfect with low base rings.
I wanted to write you and thank you for your fast delivery. On Friday I emailed with a question, heard back from you. Then ordered your no drill mount and now it's 1pm Monday and it's already installed on my rifle. First your customer service is amazing, second I have to say I am not a handy man. My wife let's me destroy things but can't fix anything. Your mount was so easy I could do it. Probably easy enough a caveman could install it. Went on smooth and fast. I can not thank you enough for a great, easily installed mount.
Thank you very much for the rail mount for my model 94. Everything went smoothly together. Took it to the range this weekend. Target acquisition was very fast. Glad to bring it into the 21st century. Now onto some hog hunting!!!
A very satisfied customer!!!
I wanted to add my story to the numerous ones that I'm sure you've received concerning your No-Drill Winchester Tactical Rail and say 'thank you' for a great product. I had inherited a Model 94 a few years ago from my uncle who had passed away. It is a top-eject and, as you can guess, I was having trouble finding a suitable mounting bracket without having to alter the rifle. This rifle holds a lot of memories for me from all the years that we would go out and either hunt or just do target practice somewhere and I really didn't want to change it up in any way. My 9-yr old son is now starting to deer hunt with me and I thought it would be a good option for him because it's a smaller, lighter rifle, but it definitely needed a scope to at least get it a little more accurate. This was a great option! Thanks again for helping me preserve my memories and to make some new ones now with my son.
I had written you back in the Spring thanking you for a great product. What can I say other than this thing works! Thanks for helping put a smile on my son's face and helping him get that first deer.
Mounted on a Winchester Model 94 and using a long-eye relief scope.
Just a quick note. After speaking with you yesterday, and re-watching your instruction videos several more times, I want to say that you may have missed calling as a Mechanical Engineer. I worked at NASA as a Mechanical Engineer and Machinist for 18 years and saw MANY other engineers and trade folks that never even came close to your design skills or manufacturing abilities. I have never been to Colorado, but if I do make it there, I'd to see your facility, and of course, meet you and shake your hand. I will be ordering a mount for my Mares Leg very soon as a Christmas gift. Please keep up the great work. Thanks again.
I ordered and received one of your No-Drill Mounts for my Model 94 and I must say that I am extremely happy with it, the ship time was fast, the build quality of the mount is top notch and the ease of install was a cinch. After taking the rifle to the range I must say this gun that I bought as a 17 year old in 1974 and has been sitting in the safe for the past few years has been revitalized and will be my main deer rifle for the Georgia woods this season, all because of the addition of the mount and a scout scope … I am more than happy with your mount and just wanted to pass along my thanks to you and your awesome product!
Take care, Rick F.
It was a straight forward installation and yes I have now entered the 21st century. My old eyes can focus on the dot perfectly and no problem sighting the Bushnell in.
I made up a new holster with a longer slot in the front and a little wider to accommodate the width of the rail attached to the receiver.
I received your mount a couple weeks ago for my pre-64 Win 94 30-30 and today received the scope that I wanted mounted on the rifle. I chose a Burris 2.75X scout scope. Taking the rifle to the range I was able to shrink my groups down to 1-1/2 to 2 MOA at 100 yards easily. Attached is a photo of my Win 94. Thanks for a brilliantly designed scope mount.
Mate just a quick note complimenting you on your product and service.
I ordered a Tactical Rail for my brand new model 94 three weeks ago from way over here in Perth Western Australia.
Once I placed the order you provided an immediate response confirming dispatch and the item arrived within 10 days (can't even get that quick a delivery from stuff I order here in Australia).
I've fitted the rail which took all of ten minutes (mainly because I was being very careful not to drop and lose a component in my messy workshop), I've fitted a reflex red dot scope and the whole thing is just perfect, everything fitted together like a dream (normally when you buy stuff it seems never to be quite right and always needs adjusting or modifying).
But not the Pearson Tactical Rail.
So I can't speak highly enough of your service, your product and just how simply perfect it is.
After I watched the video I figured there was no reason to read the instructions. I got me a file as you suggested and what do you know, it went right in after filing just a little. I can not tell you how impressed I was that I sent you a e-mail, went to to take a shower, and in less that 5 minutes you called me back. I am 68 years old, have done business with all kinds of people and companies but none can hold a candle to you. It is good to know there is someone such as yourself that takes pride in his product and takes care of his customers even when you know the product works and the dummies just need to read a little bit. I won't forget your quick response and will be sure to tell my friends about you. Thanks for your time and effort.
Your New Friend,
What a product! For a number of years my Winchester 94 levers have sat in the back of my safe. Due to my failing eye sight a scoped rifle has been first choice when going hunting. Your mount system has changed that in a big way. Within an hour of receiving the product in the mail I had it mounted along with a red dot sight on my Winchester 94 trapper. The following day I used it on a hunt and bagged 6 hogs with 6 shots. I am in love with my levers again and I have just ordered another mount for my Winchester 94 375 big bore. Again great product!
.375 Winchester Big Bore Testimonial
"I mounted a red dot and took it to the range today. I can tell you how happy I am. I can actually hit the target now! At 100 yds I put'em all within the 9 ring (a huge improvement). As far as I can tell the mount hasn't moved and is solid as a rock. This is such a great idea. Anyway, for now the pigs better watch out!"
"Just wanted to say thanks for the rails. I had a chance to both sight and hunt with your rail system on my 1981 94 trapper. At the range I was grouping under 2" at 100 yards with a H1 Aimpoint. I believe it could group better with someone with younger eyes shooting. This weekend I took a hog at 128 yards off-hand, one shot with perfect placement. One of the concerns I had with your rail was its repeatability but after shooting many rounds and transporting in a soft case the gun is still dead on. Thanks for the great product. I would recommend it to anyone with a top eject 94."
You hit a home run man. Great product, easy to install, looks great. I now have a red dot sight on my Win 94. Bravo, Maestro."
"Did I mention shipping.? Got that sucker fast man. Thanks Basil!"
"I made the mistake of ordering an XS systems rail for my gun through Brownells. Of course because mine is not the AE model it requires drilling and tapping. I am a mechanical engineer and really appreciate when someone solves a problem simply and effectively.
I thought you would like some pictures of the final product. The rail went on fairly easily and aligned with the barrel nicely. As you recall I had some fun with scopes and soon settled on the Vortex Sparc."
"I love your product."
Brock M., Canada
"Received my rail today. Got it on the rifle just to see how it fit and it looks really good so far. Haven't snugged it down yet but looking to do so today. Thank you again for your time and cooperation. I really appreciate it!"
Home Q&A Testimonials Installation Instructions Optics Contact Us